DIY budget
The parts column is not the cost of diagnosing a traction-control warning. A basic engine-code reader may not read ABS codes. Sensor access, seized fasteners and post-repair verification can require equipment beyond a DIY code scan.
2026 Repair Cost Guide
Traction control light repair cost depends on whether the warning comes from a wheel speed sensor, ABS module, wheel bearing, steering angle sensor, wiring fault, brake issue, or stability control calibration. The light may also appear with brand-specific messages such as Stabilitrak or ESP.
Reviewed · Estimate methodology
Sources and scope
Last checked:
A traction-control warning does not identify a failed part. These are examples only after testing confirms a wheel speed sensor fault; hub, wiring and module work have different costs.
| Vehicle / confirmed repair | Parts | Labor | Published total | Source |
|---|---|---|---|---|
| Toyota Camry — wheel speed sensor | $235–$350 | $101–$149 | $336–$498 | RepairPal estimate |
| Honda Accord — wheel speed sensor | $184–$192 | $60–$88 | $244–$280 | RepairPal estimate |
Published figures are rounded independently; components may differ from the published total by $1. These are estimates across model years, not invoices or a quote for your trim, year or ZIP. Taxes, fees, diagnosis and related repairs may be extra. They are separate from CarCostHub's editorial planning profiles.
| State | Sample shops | Middle half, per hour | Median per hour | Two hours of labor only |
|---|---|---|---|---|
| California | 220 | $100–$150 | $135 | $200–$300 |
| Texas | 251 | $100–$140 | $120 | $200–$280 |
| New York | 66 | $100–$139 | $125 | $200–$278 |
| Ohio | 98 | $90–$125 | $100 | $180–$250 |
Source: ARI labor-rate sample and methodology. This software-user sample is not a census of shops. Shop type, city and the quoted operation still matter; the two-hour illustration is not a labor-time recommendation for this repair.
The parts column is not the cost of diagnosing a traction-control warning. A basic engine-code reader may not read ABS codes. Sensor access, seized fasteners and post-repair verification can require equipment beyond a DIY code scan.
Request ABS codes, a comparison of wheel-speed signals and wiring checks before approving a sensor. Ask whether the sensor is separate from the hub and whether calibration is needed. Abnormal braking or a red brake warning requires prompt professional assessment.
Read our estimate methodology and editorial policy for source boundaries and corrections.
Use this page when the dash says traction control, service Stabilitrak, ESP, stability control, or ABS. These systems share data from wheel speed, steering angle, brake pressure, yaw, and engine controls. A good quote explains the stored codes and which sensor or module failed testing.
Use the $120-$1,500+ planning range to compare the total quote before separating diagnosis, parts, and labor.
The repair table below shows common quote lines so you can see whether the shop is pricing diagnosis, parts, labor, or related work.
Some estimates repair one failed part; others replace a larger assembly. Confirm which scope is included before approving work.
Cost table
These ranges are planning numbers for US drivers. Local labor rates, vehicle design, diagnosis, and parts availability can move the final repair quote above or below the table.
| Repair or quote line | Planning cost | How to read it |
|---|---|---|
| ABS or traction diagnosis | $90-$180 | Requires scan-tool access to ABS and stability modules. |
| Wheel speed sensor replacement | $150-$450 | Common cause of traction and ABS warnings. |
| Wheel bearing or hub replacement | $250-$1,300 | Some hubs include the speed sensor. |
| Steering angle sensor or module work | $300-$1,500+ | May require calibration or programming. |
Cost drivers
The same search query can represent a quick inspection, a simple part replacement, or a major mechanical repair. Review these drivers before comparing quotes.
ABS and stability modules store different codes than the engine computer.
Wheel speed sensors can be separate, integrated into hubs, or affected by damaged tone rings.
If the sensor is built into the hub, the repair may require bearing replacement.
Broken wires near the wheel, corrosion, or connector issues can mimic sensor failure.
Steering angle and stability sensors may require scan-tool calibration after repair.
ABS, traction control, brake lights, and stability warnings often overlap in diagnosis.
Symptoms
Match the estimate to symptoms, not just the part name. A code, light, sound, leak, smell, or driving condition helps a shop choose the right test path.
The system may be disabled until codes are diagnosed and repaired.
Combined ABS and traction lights often point to wheel speed or module data faults.
GM-style messages may involve wheel speed, steering angle, brake, or engine data.
ESP warnings use similar stability control inputs and need module scanning.
Wheel bearing noise with warning lights can indicate a hub or sensor issue.
Some warnings appear after service and may need calibration or relearn.
Before approving work
A useful repair estimate should explain what was tested, what failed, what parts are included, and what is excluded. Use these checks to avoid comparing incomplete quotes.
Related estimates
Compare related repair costs and diagnostic guides before approving a mechanic quote.
FAQ